That is correct in the setup. I'm not sure if the injector has surge or
not. It was a Ruckus POE block which physically looks the same as a
UBNT POE block.
On 9/27/2016 10:28 AM, That One Guy /sarcasm wrote:
this was a POE OUT port on the mikrotik connected to the non POE port
on the injector? is it an injector with surge suppression?
On Tue, Sep 27, 2016 at 10:07 AM, Nate Burke <[email protected]
<mailto:[email protected]>> wrote:
I was using a RB951Ui-2HnD and a 750UP on my desk for some testing
because they were laying within reach. I was NOT using the POE
Out functionality of the boards. I was using an external 48V gig
POE Injector to bench test a Ruckus AP.
On both boards, after using them in the test setup for a few days,
the Interface on the mikrotik that had the LAN side of the
external POE Injector plugged into it now remains 'link ok' even
when there is nothing plugged in, and the Mikrotik thinks the port
is in a network loop. The only thing that looked out of the
ordinary was that the Mikrotik POE was set to 'auto' and was
showing state of 'short circuit' I did not realize this until
after the problem started. I'm pretty sure the Mikrotik boards
are fried, as nothing I do will stop them from having the
interface up and in a loop state, but I'm not sure why it
happened. Was there something with the mikrotik set to Auto POE
and an external Gig POE adapter that fried the port? If so,
warning to others out there to watch out for this.
--
If you only see yourself as part of the team but you don't see your
team as part of yourself you have already failed as part of the team.
