Doesn't include land cover I bet
1100 Wayne St
Troy, OH 45373
On Oct 17, 2016 7:25 PM, "Craig House" <cr...@totalhighspeed.net> wrote:
> Wink planner shows that it supposed to be a -65 signal
> Sent from my iPhone
> On Oct 17, 2016, at 18:20, Josh Luthman <j...@imaginenetworksllc.com>
> Plug into LinkPlanner
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
> On Oct 17, 2016 7:11 PM, "Craig House" <cr...@totalhighspeed.net> wrote:
>> Very close to the top of the water tower on the remote end. It bottom of
>> the dish is resting on hr tank because the mount wasn't stable enough with
>> all the wind here today 45mph. I'll raise it up and brace the mount
>> tomorrow and see what happens.
>> Sent from my iPhone
>> > On Oct 17, 2016, at 18:03, David Kunat <m...@davidkunat.com> wrote:
>> > There are only two polarities on th af-x series.
>> > The first two are the receive signals at the local device.
>> > The second two (Rem chain0 and Rem chain 1) are the remote device
>> receive levels (at the far end of the link).
>> > Is there something in the way? Are you shooting close to the ground or
>> close to tree tops on one end?
>> > > On Oct 17, 2016, at 2:39 PM, Craig House <cr...@totalhighspeed.net>
>> > >
>> > > So when you have one chain that shows almost 20 dbi weaker than the
>> other 3 how do you tell which end to troubleshoot? I have already tried to
>> point both ends better but they are 22 miles apart by air. 45 minutes by
>> drive and I dont want to just keep driving and climbing if someone can tell
>> me which end has the problem.
>> > >
>> > > Craig
>> > > <link.PNG>