noted....we will have hill and distance between antenna as isolation assist

Jaime Solorza
Wireless Systems Architect
915-861-1390

On Wed, Nov 2, 2016 at 2:00 PM, Lewis Bergman <[email protected]>
wrote:

> Yea they do. My point is that when you adjust the levels you are turning
> down gain. Every 3db of gain you drop is halving the power. If you have
> plenty of power on that mountain top it won't matter. If not, then dropping
> the gain down will influence the coverage out the other end.
>
> On Wed, Nov 2, 2016 at 2:05 PM Jaime Solorza <[email protected]>
> wrote:
>
>> I will have plenty of antenna separation and these booster have
>> adjustable levels across all five bands.
>>
>> On Nov 2, 2016 12:28 PM, "Lewis Bergman" <[email protected]> wrote:
>>
>> They work better when there is some isolation between the antennas. Might
>> have to put a grounded shield between them if the amp is over driven.
>>
>> On Wed, Nov 2, 2016, 12:44 PM Jaime Solorza <[email protected]>
>> wrote:
>>
>> math adds up.....distance from site to ranch house is short ..thanks
>>
>> Jaime Solorza
>> Wireless Systems Architect
>> 915-861-1390
>>
>> On Wed, Nov 2, 2016 at 11:36 AM, Chuck McCown <[email protected]> wrote:
>>
>> Yagi or log periodic on each side.  Should work just fine.
>>
>> *From:* Jaime Solorza
>> *Sent:* Wednesday, November 02, 2016 11:33 AM
>> *To:* Animal Farm
>> *Subject:* [AFMUG] Cell booster question
>>
>> Hola Borg:
>> Has anyone installed a cellphone booster on a hill with antenna pointing
>> at donor tower distance away and then point antennas down into a valley to
>> cover ranch home area?
>> The hills have coverage but valleys below don't at this hunting ranch.
>> Same one where I installed a VHF two way repeater system powered by
>> solar..That system offers almost 95% coverage!!!!  We can have them build
>> us a shed to house gear and kind of stay within FCC guidelines, cough,.
>> Ranch is 20 miles from Marfa.
>> Ideas??....I considered installing system at ranch first and then
>> testing.  I must have a -100dB signal to work with and if not I have to use
>> the hill.
>>
>>
>> Jaime Solorza
>> Wireless Systems Architect
>> 915-861-1390
>>
>>
>>

Reply via email to