And Matt clarified that the new 5GHz 450i integrated AP uses the same
new antenna that has the 2 degree downtilt. I like the new one. Small
and sexy. And it's a true -3dB 90. Slightly heavy, but really not much
different than the Laird OEM 450 sectors.
On 11/21/2016 6:40 PM, Adam Moffett wrote:
....and I suppose the issue is only relevant if your vendor still has
the original sector in stock.
------ Original Message ------
From: "Adam Moffett" <[email protected] <mailto:[email protected]>>
To: [email protected] <mailto:[email protected]>
Sent: 11/21/2016 7:38:40 PM
Subject: Re: [AFMUG] Also.. downtilt on ePMP antennas needed
Yeah I'm talking about the original sector antenna vs the one they
started selling with the ePMP 2000. They now are just calling that
one the "ePMP Sector Antenna" and selling it for both the 1000 and 2000.
First Image below is from the 2000 sector spec sheet. Second image
is from a spec sheet from the older antenna. The newer one has null
fill as you said, but you can also see a couple degrees of electrical
down tilt. The zero degree mark is 4db or so below peak gain.
------ Original Message ------
From: "Mathew Howard" <[email protected]
<mailto:[email protected]>>
To: "af" <[email protected] <mailto:[email protected]>>
Sent: 11/21/2016 7:12:34 PM
Subject: Re: [AFMUG] Also.. downtilt on ePMP antennas needed
Is there a new sector other than the ePMP 2000 sector? If I remember
right, those don't have electrical down tilt (but they do have null
fill)... I could be wrong though. I wasn't aware they had changed
the original ePMP 1000 antennas, but I haven't bought any of those
in a long time, so I guess I don't actually know....
On Mon, Nov 21, 2016 at 3:26 PM, Adam Moffett <[email protected]
<mailto:[email protected]>> wrote:
They changed sector antennas at some point....I think the newer
ones have the electrical down tilt and the old ones don't.
------ Original Message ------
From: "Josh Luthman" <[email protected]
<mailto:[email protected]>>
To: [email protected] <mailto:[email protected]>
Sent: 11/21/2016 4:24:45 PM
Subject: Re: [AFMUG] Also.. downtilt on ePMP antennas needed
That's so stupid.
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 21, 2016 3:46 PM, "Adam Moffett" <[email protected]
<mailto:[email protected]>> wrote:
Yeah, but watch the specific model number!
Some of them have electrical down tilt and others don't!
------ Original Message ------
From: "Josh Luthman" <[email protected]
<mailto:[email protected]>>
To: "[email protected] <mailto:[email protected]>" <[email protected]
<mailto:[email protected]>>
Sent: 11/21/2016 12:29:55 PM
Subject: Re: [AFMUG] Also.. downtilt on ePMP antennas needed
Pretty sure that's in the spec sheet but I could be wrong
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Nov 21, 2016 at 10:53 AM, Paul McCall
<[email protected] <mailto:[email protected]>> wrote:
Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800 <tel:772-564-6800>
[email protected] <mailto:[email protected]>
www.pdmnet.com <http://www.pdmnet.com>
www.floridabroadband.com <http://www.floridabroadband.com>
