No limit with the proper shunt. From: Jesse DuPont Sent: Friday, December 2, 2016 9:30 AM To: [email protected] Subject: Re: [AFMUG] Site Monitor
I'll look at PacketFlux. I'm needing upwards of 60 amps bi-directional current monitoring for battery string. Jesse DuPont Network Architect email: [email protected] Celerity Networks LLC Celerity Broadband LLC Like us! facebook.com/celeritynetworksllc Like us! facebook.com/celeritybroadband On 12/2/16 9:17 AM, [email protected] wrote: Looks a bit on the hobby level to me. And more expensive than Forrest’s products. From: Jesse DuPont Sent: Friday, December 2, 2016 8:49 AM To: Animal Farm Subject: Re: [AFMUG] Site Monitor Ahh found it: flexSCADA. Sorry about that. Jesse DuPont Network Architect email: [email protected] Celerity Networks LLC Celerity Broadband LLC Like us! facebook.com/celeritynetworksllc Like us! facebook.com/celeritybroadband On 12/2/16 8:46 AM, Jesse DuPont wrote: Someone, a few months ago, sent a link to the group for a site monitor system for monitoring DC voltage, current, etc. via IP/SNMP and it used external current shunts. It wasn't the Newmar, the Tycon TPDIN or the PacketFlux. Does anyone remember? Seemed like it was $250-300 ish or the main unit and then the add-on sensors. Thanks! -- Jesse DuPont Network Architect email: [email protected] Celerity Networks LLC Celerity Broadband LLC Like us! facebook.com/celeritynetworksllc Like us! facebook.com/celeritybroadband
