Thats the best commercial in a long time On Wed, Dec 7, 2016 at 12:36 AM, CBB - Jay Fuller <[email protected] > wrote:
> > 1) I may be eating my words as i read more. then again, there may have > been an issue with the backhaul and "port flapping" too. still more > questions than answers. and... > > 2) i'm learning mimosa and flow control might not go together? like, it > is assumed on a certain forum that mimoas's flow control does nothing... ? > stay tuned (or don't) for more developments.....i don't care > > reference: https://www.youtube.com/watch?v=q-RLqLx1iYI > > > > ----- Original Message ----- > *From:* Kurt Fankhauser <[email protected]> > *To:* [email protected] > *Sent:* Tuesday, December 6, 2016 10:03 AM > *Subject:* Re: [AFMUG] attn: mhoppes + netonix + flow control > > when is that "issue" going to be addressed by Ubiquiti? I have alot of > Airfiber links up but I havn't turned on the Flow Control setting on any of > them yet. > > On Tue, Dec 6, 2016 at 8:22 AM, Faisal Imtiaz <[email protected]> > wrote: > >> See enclosed... >> >> And keep in mind that there is an 'issue' with UBNT Airfibers causing >> pause frame storms... >> >> Regards. >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 <(305)%20663-5518> >> >> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: >> [email protected] >> >> ------------------------------ >> >> *From: *"Josh Baird" <[email protected]> >> *To: *[email protected] >> *Sent: *Tuesday, December 6, 2016 7:43:15 AM >> *Subject: *Re: [AFMUG] attn: mhoppes + netonix + flow control >> >> Which counters are you specifically talking about, Faisal? >> >> On Mon, Dec 5, 2016 at 8:44 PM, Faisal Imtiaz <[email protected]> >> wrote: >> >>> Mama says... "Flow Control is the Devil " !! >>> >>> in all seriousness, Flow Control is a powerful setting, which can hurt >>> or solve issues, depending on a lot of what if's. >>> >>> With the netonix, they way to see if you need flow control or if it is >>> on is to do BW tests on the link (i.e. force a large amount of traffic >>> across) and look at the Port stats (counters).... >>> you will be able to see if you need it and or what is the effect of it, >>> being on or off.... >>> >>> :) >>> >>> Regards. >>> >>> Faisal Imtiaz >>> Snappy Internet & Telecom >>> 7266 SW 48 Street >>> Miami, FL 33155 >>> Tel: 305 663 5518 x 232 <(305)%20663-5518> >>> >>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: >>> [email protected] >>> >>> ------------------------------ >>> >>> *From: *"CBB - Jay Fuller" <[email protected]> >>> *To: *[email protected] >>> *Sent: *Monday, December 5, 2016 6:02:02 PM >>> *Subject: *[AFMUG] attn: mhoppes + netonix + flow control >>> >>> >>> Upgraded firmware, this was certainly hurting our system. Speed >>> complaints galmore. >>> Upon further investiation we discovered flow control was turned on >>> automatically on a netonix upgrade. >>> Researched our backhauls, ran speed tests between mikrotiks, etc, etc, >>> things were certainly slower. >>> Enabled flow control on the mimosa backhauls we have ; no effect. >>> >>> Rolled it all back over the weekend (but forgot where i'd read in the >>> forum netonix enabled flow control at some point) >>> found it tonight and immediately speeds are up by 33% (we were doing >>> 90-100 meg, now doing 120-120, at peak >>> times should be doing 200+) >>> >>> just sharing... >>> >>> ALSO - noticed on the mimoas although we had flow control enabled, the >>> switch apparently never saw it. It has an icon >>> for flow control and the EPMP radios we have showed it was enabled but >>> although it was enabled on the mimoas the >>> netonix never showed the flow control icon by the mimoas radios.... >>> >>> >>> >>> >> > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
