Yep. SWS in Alaska has around 40 AF24 links. Ring topology with some spokes and other ptp.
On Dec 12, 2016 4:35 PM, "Mathew Howard" <[email protected]> wrote: > Sync would only apply if they're running half duplex... if they're in full > duplex mode, you accomplish the same thing by just using the same tx > channel. > > On Mon, Dec 12, 2016 at 4:31 PM, Josh Reynolds <[email protected]> > wrote: > >> Yes you can GPS synch them. Likely don't need to though, as long as tx is >> the same. >> >> On Dec 12, 2016 3:53 PM, "Sterling Jacobson" <[email protected]> >> wrote: >> >>> I've got an Airfiber 24HD on a rohn tower on top of a mountain that >>> needs more downtilt than it allows. >>> >>> The Rohn is pretty thin, probably less than 1 ½ inch. >>> >>> I need ideas on how to leverage the existing mount for more downtilt, or >>> worst case scenario, get a different mount to the Rohn then mount the >>> Airfiber on that. >>> >>> What do you guys think? >>> >>> Also, is it possible to GPS Sync an Airfiber 24 and an Airfiber 24HD >>> units? >>> >>> The master units are on towers on a mountain about a mile apart. >>> The slaves are on my house, but separated from each other by my roof >>> peak. >>> >>> They are about 2.5 degrees apart as viewed from the slaves. >>> >>> Is this even a working scenario? >>> >> >
