Run it backwards through the Lewis spellcheck algorithm. Dobby = don’t
Jane = have From: Af [mailto:[email protected]] On Behalf Of That One Guy /sarcasm Sent: Tuesday, December 20, 2016 2:32 PM To: [email protected] Subject: Re: [AFMUG] Cambium 450 can signal be too hot? mary jane? On Tue, Dec 20, 2016 at 2:17 PM, George Skorup <[email protected] <mailto:[email protected]> > wrote: ...at the cost of somewhat high probability of interfering with the opposite sector on the same freq. Been there, done that. Note than -52dBm is the default SM target receive level for SM Tx power control. I usually try to back this off to -55 or -57. And yes, I have short range SMs receiving at -45 to -50dBm. These will sometimes see the opposite sector. 30+dB of f/b ratio is great, but in this instance, it's not enough to achieve 256QAM. So you need to be very careful about what you're doing with customers close to sites. Some of these we've moved to an omni (yeah I know) at 5.4 dedicated to short range customers. On 12/20/2016 1:58 PM, Matt Mangriotis wrote: -55 dBm is a perfectly acceptable target level.� In fact, sometimes, you�ll want to set the target slightly higher (like -52 dBm) to overcome higher noise levels. -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
