Can't really turn down power on a point to multi-point system... the AP should already be turning down the TX power on the SM, if it's configured properly.
But it sounds like a good place to use a Force 180 instead of a 200. On Mon, Jan 16, 2017 at 11:28 AM, Josh Luthman <[email protected]> wrote: > Please reduce the power for everyone's benefit. Go down to, ideally, > -60. After changing power look at the performance and make sure it's still > all MCS15. > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Mon, Jan 16, 2017 at 12:23 PM, Chuck McCown <[email protected]> wrote: > >> Cambium posted something about this recently. >> >> I think you are still OK at that level. I think they said something like >> signal problems starting at –35 and physical damage to the RX components at >> –25 or some such figure. Be good to see that post again. >> >> *From:* Christopher Gray >> *Sent:* Monday, January 16, 2017 10:05 AM >> *To:* [email protected] >> *Subject:* [AFMUG] How Hot is Too Hot for ePMP? >> >> I have a Force 200 receiving at -37 dBm. Is this ok, or do I need to >> mis-align to reduce signal strength? >> >> > >
