I was using CCR 8G 2+ SFP or whatever, the one with 8 GigE ports and two 10Gbps SFP+ ports for a while.
Before I implemented VPLS/MPLS I was getting around 9600Mbps to speedtest.net to my own server and one external server. That was static routed, so OSPF would be the same. Version 6.3x For some reason, I'm not 100 percent sure on this, I think the VPLS implementation killed that to about 1500Mbps both ways. I just recently upgraded everything to 6.38 and now I can get about 5000Mbps over MPLS/VPLS (two-three MPLS hops). So I'm just not sure what's going on with that, but for the moment it can carry what I need. I'm thinking of going back to just routing the bulk of my customers with OSPF instead of VPLS ports to see if I can gain back the full 10Gbps. From: Af [mailto:[email protected]] On Behalf Of Stefan Englhardt Sent: Thursday, January 19, 2017 6:37 AM To: [email protected] Subject: Re: [AFMUG] Which CCR Router OS combo is the most solid? Any CCR is fast enough. We still run at 6.30 which is very stable. OSPF + MPLS/VPLS. We lost some CCR1036-12G-4S PSUs. The placement of the PSU is not good for warmer sites. Von: Af [mailto:[email protected]] Im Auftrag von Gino Villarini Gesendet: Donnerstag, 19. Januar 2017 14:13 An: [email protected]<mailto:[email protected]> Betreff: [AFMUG] Which CCR Router OS combo is the most solid? For L3 OSPF routed network capable of gigabit traffic Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:[email protected]]
