Brocade VDX switches in there as well.
----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP ----- Original Message ----- From: "Josh Reynolds" <[email protected]> To: [email protected] Sent: Wednesday, January 18, 2017 7:49:16 PM Subject: Re: [AFMUG] Switch expert help/advice 2nd hand market there's quite a few. Quanta, Juniper EX4500s, some older brocade fastirons, etc. I'm sure there's plenty of Cisco's, I just don't keep up with them so much on the hardware side. On Jan 18, 2017 7:35 PM, "Sterling Jacobson" < [email protected] > wrote: Sounds interesting, but doesn’t fit my model. Also, not many switches 1U that have 48 port all SFP switches out there, or 48 port all SFP+ either for that matter under $2500. From: Af [mailto: [email protected] ] On Behalf Of Paul Stewart Sent: Wednesday, January 18, 2017 6:31 PM To: Animal Farm < [email protected] > Subject: Re: [AFMUG] Switch expert help/advice Nice! Common model of deployment especially with Juniper MX upstream … <blockquote> On Jan 18, 2017, at 5:54 PM, Carl Peterson < [email protected] > wrote: I'm in the process of deploying something similar for our wired MDUs. Each MDU gets an SVLAN and each customer gets a CVLAN so there is a unique CVLAN.SVLAN for each customer. The SVLANs go into a VPLS connection back to a Juniper BNG which dynamically creates the SVLAN/CVLANs, authenticates the clients vs radius, and assigns DHCP. I am disabling STP and filtering it on customer ports. On Wed, Jan 18, 2017 at 4:47 PM, Seth Mattinen < [email protected] > wrote: <blockquote> On 1/18/17 13:33, Josh Baird wrote: <blockquote> In Cisco, this would be bpduguard. Dare I suggest this is the perfect example of a use case for a proper metro ethernet switch with UNI/NNI port profiles. ~Seth </blockquote> -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 </blockquote> </blockquote>
