if a guy floated his cable shield or drain, aside from it defeating the intended purpose of the shield, could the sync pulse be put across that and the other pin connected to ground at the radio to use they sync port without gps data?
On Tue, Jan 31, 2017 at 12:40 PM, Sean Heskett <[email protected]> wrote: > with the gigabit syncinjector i left it how it came from the factory and > just plugged everything in and it worked. > > on the bench gigabit worked just fine but on the tower i had to slow them > down to 100mbps because it's an FM radio tower and too much RF to handle > gigabit. this summer we will be running fiber...we were under the gun to > get these deployed in late October at the top of 2 mountains that already > had snow on them. luckily the other tower is on the ski area and i can > snowboard to that one. > > here's a pic for ya. this unit is receiving sync over power from the > gigabit syncinjector and sync over timing port from the syncbox12. > > [image: Inline image 1] > > On Tue, Jan 31, 2017 at 11:31 AM, Forrest Christian (List Account) < > [email protected]> wrote: > >> I have a theory about why this works. I won't bore you with the details >> but suffice it to say that the circuitry wasn't designed to work that way. >> >> It will be interesting to see if the powerinjector works if you jumper >> all for pairs for power like you should for a 450m >> >> >> On Jan 31, 2017 11:19 AM, "Sean Heskett" <[email protected]> wrote: >> >>> I have three 450m's hooked up to a gigabit syncinjector and they are all >>> receiving sync. >>> >>> packetflux no longer sells the gigabit syncinjector so at the other >>> tower i'm about to install the gigabit powerinjector+sync that replaced it. >>> >>> I know forest says it won't work but i have proof otherwise. ;-) >>> >>> have you made sure that sync is enabled for the ports?? >>> >>> -sean >>> >>> >>> On Tue, Jan 31, 2017 at 9:49 AM, Vlad Sedov <[email protected]> wrote: >>> >>>> Hey peeps. Has anyone been able to successfully pass sync to Medusa >>>> from the gigabit PowerInjector+Sync? >>>> I have all the power dip switches set correctly, as far as I know. >>>> Radio boots, holds GigE just fine, just won't receive the timing pulse. The >>>> yellow light on the injector blinks once every second, so I assume it's >>>> getting the pulse from the SyncPipe. >>>> >>>> thanks! >>>> >>>> Vlad >>>> >>> >>> > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
