Title: Re: [AFMUG] PoE Cat5/6 cable distances
I've been down this road many times. Our biggest issue is lightning. Anytime we did anything with long ethernet runs, we would get blown out ports multiple times a year. We moved to the vdsl stuff and that seemed to handle the surges better. My guess is they are designed to handle the surges better. One major draw back is your going to be limited on speed. We were able to get close to 100mbps on the older stuff.
Just looked at their web page. https://www.versatek.com/product-category/ethernet-extenders/. Looks like they have vdsl2 sfp modules now. They look interesting.
--
Best regards,
Mark mailto:[email protected]
Myakka Technologies, Inc.
www.MyakkaTech.com
Proud Sponsor of the Myakka City Relay For Life
http://www.RelayForLife.org/MyakkaCityFL
Please Donate at Please Donate at http://www.myakkatech.com/RFL.html
------
Saturday, February 4, 2017, 3:39:31 PM, you wrote:
|
I'm also looking at this type of problem for a customer, a few buildings far apart with long ethernet runs between them, on that network ports and devices sometimes die, I believe due to the varying voltage potential difference between the buildings. There are some grounded surge supressors there that may be helping - but not much. Most SSes only trigger at higher, lightning-level voltages.
Having the long ethernet cable between buildings be shielded (and correctly grounded at both ends) can help too, but if it ends up equalizing the potential between both buildings, you could have a few amps flowing between the buildings over that shield, which would be very bad indeed. A heavy-gauge ground cable between the buildings may be the best option but would be expensive.
Another option is creating an optoisolator at one end with two back-to-back fiber-optical converters. As long as the one wired to the further building doesn't couple Ethernet "ground" to power ground inside itself.
On Fri, Feb 3, 2017 at 12:33 PM, Adam Moffett <[email protected]> wrote:
|
A grounded surge suppressor on each end will help with that.
The ground can have a different electrical potential at two points that far apart. Then you get a current through your devices trying to equalize it.
------ Original Message ------
From: "That One Guy /sarcasm" <[email protected]>
To: "[email protected]" <[email protected]>
Sent: 2/3/2017 1:14:02 PM
Subject: Re: [AFMUG] PoE Cat5/6 cable distances
|
We have a customer who trenched 500 foot of cat5 to an outbuilding, routers pop for "some reason"
I wonder if an extender would help with that
On Fri, Feb 3, 2017 at 11:48 AM, Ken Hohhof <[email protected]> wrote:
|
Are you trying to exceed 100 meters? Is there a good reason not to use fiber + DC power?
-----Original Message-----
From: Af [mailto:[email protected]] On Behalf Of Adam Moffett
Sent: Friday, February 3, 2017 11:47 AM
To: [email protected]
Subject: Re: [AFMUG] PoE Cat5/6 cable distances
Google for ethernet extenders with PoE.
They exist. Never used one. I think up to 1000'
------ Original Message ------
From: "Dev" <[email protected]>
To: [email protected]
Sent: 2/3/2017 12:45:40 PM
Subject: [AFMUG] PoE Cat5/6 cable distances
>Is there any way to extend the cable length over a few hundred feet and
>still get reliable power/data?
|
--
If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team. |
|
|
