Are you seeing any link performance issues? Bet this might be a software bug/error that disappears if you reboot one or both radios.
On Thu, Feb 9, 2017 at 9:56 AM, Jay Weekley <[email protected]> wrote: > I've got a Mimosa link with an odd chain issue on a pair of Mimosa radios > connected to Ubiquiti Rocket dishes. The signal on vertical chain four is > very poor to non-existent on the access point side of the link but what I > assume is the corresponding chain 4 on the station side is just fine. > It's the same connector that receives and transmits on the chain 4 (I > assume) so does it make sense for only one side to be bad? What do you > think? Radio problem or connector problem? > > Access point > Chain Tx Power (dBm) Rx Power (dBm) Rx Noise (dBm) SNR (dB) Center Freq. > (MHz) Pol > 1 21 -58.8 -89.4 31 5535 DFS H > 2 21 -58.9 -89.4 31 5535 DFS V > 3 21 -59.0 -88.9 29 5330 DFS H > 4 21 -- -88.9 -- 5330 DFS > Station > Chain Tx Power (dBm) Rx Power (dBm) Rx Noise (dBm) SNR (dB) Center Freq. > (MHz) Pol > 1 21 -59.3 -88.9 29 5330 DFS H > 2 21 -59.0 -88.9 29 5330 DFS V > 3 21 -59.0 -89.9 30 5535 DFS H > 4 21 -59.5 -89.9 30 5535 DFS V > >
