Interesting....the VC limit had never been a practical limit the whole
time I used Canopy. I guess we're saying it could be now?
------ Original Message ------
From: "George Skorup" <[email protected]>
To: [email protected]
Sent: 3/6/2017 6:51:23 PM
Subject: Re: [AFMUG] 450M
The VC limit is still 238 on 2.5ms framing. 5ms framing cuts that in
half. The HP channel enabled on an SM also sucks up a VC, so keep that
in mind.
On 3/6/2017 5:35 PM, Dan Petermann wrote:
Maximum amount of SMs.
The 450s have a limit of 200 (or so). Practically, you run out of
bandwidth before reaching that limit.
With the 450M having a potential of 3-4 times the bandwidth capacity,
the number of VCs available may become a limit. Right now we hit 60-70
customers per AP before the downlink utilization is hitting max
capacity. With three times the bandwidth available, 180-210 customers
becomes doable. If 10-15% has our voip service, that cuts the
available VCs down and limits the amount of customers that can be
installed.
Will that happen? Probably not, and if so, thats a good problem to
have.
I�m curious if the max SM count has been increased.
On Mar 6, 2017, at 4:19 PM, Chuck McCown <[email protected]> wrote:
I don't think there is an answer. Or are you asking what is the
maximum number of SMs it will register to?
At one time, in the early days of Canopy, the answer was 200.
Or are you asking about loading and performance?
-----Original Message----- From: Dan Petermann
Sent: Monday, March 06, 2017 4:11 PM
To: [email protected]
Subject: [AFMUG] 450M
How many SMs can a 450M handle?
I can�t seem to find the answer in the manual
