C5 is negotiating at 1G but the router is obviously only negotiating at 100Mb.
I don't see this issue on any G2's in routed mode or any G2's in passthru with a 1g client behind it. On Wed, Mar 8, 2017 at 9:15 PM, Rory Conaway <[email protected]> wrote: > Are the ports negotiating at 1Gbps? I just checked the client we have and > he has had peaks of over 40Mbps although 95% of his bandwidth is under > 10Mbps. Turn it over to tech support and see what they say. > > Rory > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Rory Conaway > *Sent:* Wednesday, March 8, 2017 10:10 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers > > > > Weird, haven’t seen it but I only have 1 customer with his own router > behind a G2. I’m checking it now. > > > > Rory > > > > *From:* Af [mailto:[email protected] <[email protected]>] *On > Behalf Of *Ryan Ray > *Sent:* Wednesday, March 8, 2017 10:08 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers > > > > Yes. I can replicate it on multiple G2's, multiple 100Mb routers and > cables and multiple site locations. > > > > > > On Wed, Mar 8, 2017 at 9:06 PM, Rory Conaway <[email protected]> > wrote: > > Ryan, something is wrong. Did you try a different G2 or cable? > > > > Rory > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Ryan Ray > *Sent:* Wednesday, March 8, 2017 9:42 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Problem with Mimosa G2 & 100Mb routers > > > > It was an after need. They wanted to implement a system with their own > router but needed internet right away. So I left a G2 and switched it into > passthru after they were ready. > > > > On Wed, Mar 8, 2017 at 8:15 PM, Rory Conaway <[email protected]> > wrote: > > I’m sort of confused. Why are you using a G2 if you have your own router? > > > > Rory > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Ryan Ray > *Sent:* Wednesday, March 8, 2017 8:04 PM > *To:* [email protected] > *Subject:* [AFMUG] Problem with Mimosa G2 & 100Mb routers > > > > Not sure if anyone else is deploying the Mimosa platform en-mass but came > across a new issue today in case you're fighting with things. > > > > The issue: Client Router receives very poor download no matter what signal > conditions are like. Download capped around 10Mb/s. Upload was unaffected. > > > > The equipment: > > A5 – 2.2.1 Version – GPS Synced > > C5 – 2.2.1 Version – GPS Synced > > G2 in passthru – 1.1.2 Version > > Client Router – Asus N600 > > > > The problem: > > G2 has an issue with 100Mb routers. Plugging in a 1Gb client into the > passthrued G2 resulted in full speed. Plugging a 100Mb router caused the > download to drop to 10Mb/s levels. > > > > > > The solution: > > > > 1. Replace G2 with regular power supply, fixed issue. > 2. In C5 change the duplex from auto to 100MF, fixed issue while still > using G2. > > > > > > >
