It was pointed out to me here at AnimalFarm that there is a small part of a trace on that circuit board that will contact the grounding lug in the shelf when being inserted or removed. Not when fully seated.
So don’t have the green power power connector attached when inserting or removing the card. It can be field fixed with a small dot of fingernail polish. I will be fixing the PCB on the next run to fix the interference. I will replace any unit in the field with advance replacement. From: Dan Petermann Sent: Thursday, March 16, 2017 1:07 PM To: [email protected] Subject: Re: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNTPOE-POWERINSERTER/SURGE PROTECTOR This works flawlessly, just put it in. Thanks again for the help On Mar 2, 2017, at 3:53 PM, Dan Petermann <[email protected]> wrote: Thank you for the info! On Mar 2, 2017, at 12:22 PM, Chuck McCown <[email protected]> wrote: OK, so if you put + on the left pin and – on the right pin, then jumpers for 1/2 and 4/5 need to be on the left and center pins and the jumpers for 3/6 and 7/8 need to be center and right pins. From: Dan Petermann Sent: Thursday, March 02, 2017 11:53 AM To: [email protected] Subject: Re: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT POE-POWERINSERTER/SURGE PROTECTOR Sorry, here is the pinouts with polarity Pin 1 + Pin 2 + Pin 3 - Pin 4 + Pin 5 + Pin 6 - Pin 7 - Pin 8 - On Mar 2, 2017, at 11:34 AM, Chuck McCown <[email protected]> wrote: On all 8 pins? If so, then you slide all the jumpers one way and only hook up +48 to the POE inserter. Is the –48 via chassis ground? From: Dan Petermann Sent: Thursday, March 02, 2017 11:30 AM To: [email protected] Subject: Re: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT POE -POWERINSERTER/SURGE PROTECTOR Excellent! The polarity is +48vdc. On Mar 2, 2017, at 11:00 AM, Chuck McCown <[email protected]> wrote: I would say yes, but that document does not indicate the DC power polarity of the pairs. So yes, provided the jumpers on the POE are set right. Can anyone in Exalt tech support give you the polarity info? From: Dan Petermann Sent: Thursday, March 02, 2017 10:55 AM To: [email protected] Subject: [AFMUG] Atten: Chuck 800-GIGE-POE-APC RACK MOUNT POE - POWERINSERTER/SURGE PROTECTOR Chuck, do you know if the 800-GIGE-POE-APC will work to power up a Exalt ExtremeAir radio? We are being told that the DC power supplies won’t be available until June. ------------------------------------------------------------------------ ------------------------------------------------------------------------ Chuck, do you know if the 800-GIGE-POE-APC will work to power up a Exalt ExtremeAir radio? We are being told that the DC power supplies won’t be available until June.
