Also, this one that I just posted is an over-the-shoulder strap. I found that I like it better once I got used to it. It isn't as hard on the hips. I don't have enough meat on my bones and the tool belt would rub me raw sometimes. I saw a guy using one with a shoulder strap and had to try it out. Works like a champ!
On Thu, Mar 16, 2017 at 11:16 PM, Jeremy <[email protected]> wrote: > I've been using this one for a couple of years now. I hoist up a > different type of tool bag for towers. > > https://www.lowes.com/pd/AWP-HP-245-cu-in-Ballistic-Nylon- > Tool-Pouch/50195239 > > > > On Thu, Mar 16, 2017 at 10:56 AM, Matt <[email protected]> > wrote: > >> I was thinking more something with belt that will hold battery drill, >> screws, clips, cat-5 tools, etc. on job site while going up and down >> short ladders. All the stuff to mount j-arm, put connectors on and >> run cat-5 etc. >> >> >> >> On Thu, Mar 16, 2017 at 10:16 AM, Chuck McCown <[email protected]> wrote: >> > http://www.kleintools.com/catalog/multi-pocket-pouches/6- >> pocket-tool-pouch-tunnel-loop >> > >> > From: Jaime Solorza >> > Sent: Thursday, March 16, 2017 9:00 AM >> > To: Animal Farm >> > Subject: Re: [AFMUG] Tool Belt >> > >> > on towers I use a small pouch ....some tools are tied to my belt using >> 12 >> > gauge coated copper usually tucked into back pocket, I carry >> carpenters >> > tool belt but very rarely use it. >> > >> > Jaime Solorza >> > Wireless Systems Architect >> > 915-861-1390 >> > >> > On Thu, Mar 16, 2017 at 8:55 AM, Matt <[email protected]> >> wrote: >> >> >> >> What is everyones favorite tool belt etc. for installs? >> > >> > >> > >
