If it was just a problem hitting 100baseT, then I'd say it could be RF
noise like you're suggesting, but Sync on the POE cable interrupts the
power for a brief instant once per second. That really ought to be
quite resistant to noise....if not immune.
You might need to swap parts one at a time to find it, but I'm betting
something in the new box is broken....bad patch panel or some such.
------ Original Message ------
From: "Dave" <[email protected]>
To: "Animal Farm" <[email protected]>
Sent: 3/24/2017 8:58:30 AM
Subject: [AFMUG] RF attenuation
Hey All,
I may have made a mistake at one of my sites by moving to a new
enclosure for more room to grow.
We have a site where we have lived in a smaller aluminum enclosure for
a long time with out issue.
We have since moved to a larger enclosure with AC and still aluminum
more thicker and more space.
I am using a CTM1M to run all of the 24v gear. We use Superior Essex
for the shielding with shielded heads to the CTM
Now since the move We used a Patch panel to punch all the superior
essex to and shielded jumpers in the enclosure to the
CTM.
The Issue is that I can no longer get gps sync over poe or maintain a
full 100mbs connection on a packet flux injector for my 450i units.
My guess is either my box needs grounding or the superior essex needs
ground kits on it.
Any ideas welcome
Thanks
Dave
--
