No. I had them backward (I had to look)...
On Thu, Mar 30, 2017 at 5:02 PM, Bill Prince <[email protected]> wrote: > But 802.3at is this: > > Pair 1: White Orange.(PIN 1 ) & Orange.(PIN 2) is *NEGATIVE* > Pair 2: White Green...(PIN 3) & Green...(PIN 6) is *POSITIVE* > Pair 3: White Blue.....(PIN 4) & Blue.....(PIN 5) is *POSITIVE* > Pair 4: White Brown..(PIN 7) & Brown...(PIN 8) is *NEGATIVE* > > ... and I think you have the solid/stripes switched around backward (but > if you do it at both ends, it doesn't matter)... > > > On Thu, Mar 30, 2017 at 3:32 PM, Chuck McCown <[email protected]> wrote: > >> From Netonix: >> >> >> *There are 4 Pairs and 8 PINs in an Ethernet Cable:* >> Pair 1: White Orange.(PIN 1 ) & Orange.(PIN 2) is *POSITIVE* >> Pair 2: White Green...(PIN 3) & Green...(PIN 6) is *NEGATIVE* >> Pair 3: White Blue.....(PIN 4) & Blue.....(PIN 5) is *POSITIVE* >> Pair 4: White Brown..(PIN 7) & Brown...(PIN 8) is *NEGATIVE* >> >> *24V POE Option @ .75A - constant draw can surge/spike to 1A:* >> *802.3af/at MODE B pinout* >> Pair 3 / PINs 4, 5 are *POSITIVE* >> Pair 2 & 4 / PINs 3, 6, 7, 8 are *NEGATIVE* >> >> *48V POE Option @.75A - constant draw can surge/spike to 1A:* >> *802.3af/at MODE B pinout* >> *You would use this option to power most 802.3af/at devices like IP >> Phones and Cameras* >> Pair 3 / PINs 4, 5 are *POSITIVE* >> Pair 2 & 4 / PINs 3, 6, 7, 8 are *NEGATIVE* >> >> *24VH POE Option @1.5A - constant draw can surge/spike to 2A:* >> *802.3af/at MODE A & MODE B pinout *combined >> Pair 1 & 3 / PINs 1, 2, 4, 5 are *POSITIVE* >> Pair 2 & 4 / PINs 3, 6, 7, 8 are *NEGATIVE* >> >> *48VH POE Option @1.5A - constant draw can surge/spike to 2A:* >> *802.3af/at MODE A & MODE B pinout *combined >> Pair 1 & 3 / PINs 1, 2, 4, 5 are *POSITIVE* >> Pair 2 & 4 / PINs 3, 6, 7, 8 are *NEGATIVE* >> >> >> > > > > -- > -- > bp > part15sbs{at}gmail{dot}com > -- -- bp part15sbs{at}gmail{dot}com
