We use a multilink NID that's about 6 times the size of that for $15. RNI-3620 I think is the model. It does not have the splice tray or adapter holder but has plenty of room to add one if you wanted.
On Thu, Apr 6, 2017 at 2:06 PM, Adam Moffett <[email protected]> wrote: > Rather than hijack Paul McCall's thread, this is my version of the same > quest. > > > > http://www.fiberinstrumentsales.com/fis-nid-termination-box-lc-or-sc- > accepts-8-fibers-for-dx-lc.html > I like the above FIS brand NID box. I like that it has built in slack > storage and flip out splice tray. I like the option of using snap-in > mating sleeves. I like that the door comes off by lifting upwards...then I > can use both elbows while I'm in the box. I like that the entry points are > standard conduit knockout sizes. I like that it has a retaining clamp for > a drop cable. I like that it's weather proof. > > What would make me happier: > (1) Forget the lock. Close it with a captive thumb screw. > (2) A padlock hasp so I *could* lock it. > (3) Make it larger. I'd want space for a small switch or ONT, and I'd > want to be able to drill out the knockouts one size larger (you can't now > due to depth). > (4) The mounting screw holes in the corners require a long driver bit, > they're just barely too small for my long bit holder. ....another 1/16" > would have saved me a trip to the hardware store. > (5) Cheap. > > Someone else would want room for an AC outlet and a UPS, but not me. > > Does my perfect box already exist? Could McCown build my perfect box for > less than $20,000? >
