haha.. yeah and I’ll take something that is reliable too ;)
> On Apr 8, 2017, at 9:00 AM, Josh Baird <[email protected]> wrote: > > 5 clicks or one command? I'll take Cisco's one command. > > On Fri, Apr 7, 2017 at 11:19 PM, Timothy Steele <[email protected] > <mailto:[email protected]>> wrote: > All you Cisco lovers will hate me but just get a unfi setup what you are > doing would literally be like 5 clicks and done > > > On Fri, Apr 7, 2017, 12:38 PM Josh Luthman <[email protected] > <mailto:[email protected]>> wrote: > VLAN is 1998 - wow! > > > Josh Luthman > Office: 937-552-2340 <tel:(937)%20552-2340> > Direct: 937-552-2343 <tel:(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Apr 7, 2017 at 11:39 AM, Dave <[email protected] > <mailto:[email protected]>> wrote: > Yes.. > I come from the 1990 era of Cisco LOL > > > > On 04/07/2017 10:29 AM, Cassidy B. Larson wrote: >> switchport trunk native vlan sounds like what you’re after? >> It’ll pass an untagged vlan across a trunk port. >> >>> On Apr 7, 2017, at 9:26 AM, Dave <[email protected]> >>> <mailto:[email protected]> wrote: >>> >>> Ok, >>> So I want to manage my radio link and provide public access over that link. >>> How do I configure my Cisco for switchport trunk to allow the customer to >>> connect at the other end with a sonicwall for his public ip? >>> So the topology of this is >>> Vlan 1000 is a managed vlan >>> Vlan 2400 is the public access vlan >>> Cisco port is mode trunk dot1q to allow both vlans but since the customer >>> dont have a vlan to configure on his sonic wall I would need my radios to >>> allow >>> switchport access of 2400 >>> >>> Is there a way to tell the cisco to allow switchport access for vlan2400 on >>> the same trunked port? >>> >>> Any ideas will be helpful >>> >>> Thanks >>> Dave >>> >>> -- >>> <Vcard.jpg> > > -- > <Vcard.jpg> > >
