Yes, you can get 60MHz channels in 6GHz. I was referring to 7 and 13. Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell [email protected]
> On Apr 15, 2017, at 3:06 PM, Mike Hammett <[email protected]> wrote: > > 30 MHz, I think? I think one of the 6 GHz ones is still 30 MHz with the other > being 60? > > My memory could be faulty. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > > Midwest Internet Exchange > > The Brothers WISP > > > > > From: "Jeff Broadwick - Lists" <[email protected]> > To: [email protected] > Sent: Saturday, April 15, 2017 2:02:21 PM > Subject: Re: [AFMUG] FCC part 101 80mhz channel size?? > > And the channel sizes are very small. > > Jeff Broadwick > ConVergence Technologies, Inc. > 312-205-2519 Office > 574-220-7826 Cell > [email protected] > > On Apr 15, 2017, at 2:48 PM, Chuck McCown <[email protected]> wrote: > > 7&13 are not available in many areas. > 6 is used up in many places > > From: Mitch Koep > Sent: Saturday, April 15, 2017 12:31 PM > To: [email protected] > Subject: Re: [AFMUG] FCC part 101 80mhz channel size?? > > 6 and 7 > > 11 > > 13 > > 18 > > 23 > > https://www.intelpath.com/ > > Mitch Koep > > 218-851-8689 cell > > > > > On 04/14/2017 09:46 PM, Sean Heskett wrote: > Awesome! Are there any other bands besides 11ghz and 18ghz?? > > Thanks! > > -Sean > >> On Fri, Apr 14, 2017 at 5:17 PM Eric Kuhnke <[email protected]> wrote: >> Yes, 18 GHz has supported 80 MHz wide channels for a long time. This is how >> the Exalt ExtremeAir 18 accomplishes 1 Gbps full duplex FDD in both >> polarities between two radio units (H&V) using 256QAM 5/6 in each polarity. >> Single data payload ethernet interface on each side. Others on the list can >> correct me if I'm wrong but it was the first real 1 Gbps transparent bridge >> (not sub-1Gbps something, or 1Gbps with header/payload compression) and >> started shipping in early 2012. >> >> >> >>> On Fri, Apr 14, 2017 at 5:08 PM, Sean Heskett <[email protected]> wrote: >>> Hello all, >>> >>> Which FCC part 101 bands support 80mhz channel sizes besides 11ghz?? Does >>> 18ghz support 80mhz channels?? >>> >>> Thanks! >>> >>> -Sean >> >> > > -- > Mitch Koep > > A Better Wireless > 218-851-8689 cell >
