By the way, my reasoning on the big washers + rod is you can use a
couple of big fat wrenches to really lay the torque on them things.
I have not tried to do this with a log, but I have repaired a square
beam this way. I pulled the split all the way back together with a few
strategically placed rods and big washers.
------ Original Message ------
From: "Adam Moffett" <[email protected]>
To: [email protected]
Sent: 4/23/2017 1:03:56 AM
Subject: Re: [AFMUG] Pole banding
Something like this?
http://www.linemen-tools.com/ALUM_BAB_5848_Single_band_48_Buckle_1_1_4_p/alu-bab-5848.htm
Those guys ship pretty quick.
Just an idea, but on the same site look under "washers" for "curved
square washers". You can get 4" x 4" washers curved for poles. Run a
threaded rod or long bolt through the pole with a couple of those
washers on each side.
------ Original Message ------
From: "Jeremy" <[email protected]>
To: [email protected]
Sent: 4/22/2017 10:44:13 PM
Subject: [AFMUG] Pole banding
I have a need to band some logs that are splitting, in order to slow
or stop the process. I have found that a lot of the power pole and
utility companies sell products that should work, for attaching to
poles. I am having a hell of a time finding anywhere to actually
purchase said products though. Hubbell lists Codale as their local
distributor, but they only deal with the lighting division, not
Hubbell Power Systems. They are having trouble reaching anyone at
HPS. Anyone have any idea where I can find pole banding products?
such as this one:
http://www.hubbellpowersystems.com/pole-line/misc/banding-pole-attachments/