This one works, but the power pins need reversed for Canopy radios http://tycononline.com/TP-DCDC-2USB-24-5VDC-USB-In-24VDC-Out-12W-2USB-to-24VDC-Passive-POE-Ins_p_19.html
On Tue, Apr 25, 2017 at 8:44 AM, Mathew Howard <[email protected]> wrote: > +1 > The Linktechs Powerlink works well... I agree a tougher case would be > nice, but it works well. > > On Tue, Apr 25, 2017 at 9:21 AM, David Coudron < > [email protected]> wrote: > >> This may not be exactly what you are looking for, but we have had pretty >> good luck with the Linktechs Powerlink product. It can be a little >> temperamental at times, but for the most part does a good job of providing >> both USB power and an AP, and POE for Cambium. It is our primary method >> of doing signal checks and installs. If we had any suggestions on it, we’d >> want it to be in a little tougher case. It works well enough that we just >> ordered a second one for the other install team. Jay sent the link for it. >> >> >> >> Thanks, >> >> >> >> *David Coudron* >> >> [email protected] | *Mobile: *612-991-7474 >> <(612)%20991-7474> >> >> >> >> *Advantenon, Inc. * [image: >> cid:[email protected]] >> <http://www.linkedin.com/company/Advantenon> [image: >> cid:[email protected]] <http://www.twitter.com/Advantenon> >> [image: >> cid:[email protected]] <http://www.facebook.com/Advantenon> >> [image: cid:[email protected]] >> <http://blog.advantenon.com/> >> >> [email protected] | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN >> 55447 | www.advantenon.com | *Phone:* 800-704-4720 <(800)%20704-4720> >> | *Local: *612-454-1545 <(612)%20454-1545> >> >> >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Mathew Howard >> *Sent:* Tuesday, April 25, 2017 9:10 AM >> *To:* af <[email protected]> >> *Subject:* Re: [AFMUG] USB to POE >> >> >> >> If I remember correctly, an airgateway installer won't power a Canopy >> SM... it's either not enough current or voltage (I forget which, maybe >> both). >> >> It's been awhile since I tried to make it work, but from what I can >> remember, it's going to be pretty tough to get a Canopy SM to run off USB, >> because it's going to be tough to find a USB power source that will put out >> over 2amps (which is only 10 watts), and if I'm remembering right, a Canopy >> SM needs 12 watts.... but I would've been using a 900mhz SM, and the others >> may very well be different. All I can remember for sure was that I couldn't >> make it work reliably. >> >> >> >> On Tue, Apr 25, 2017 at 8:53 AM, Jay Weekley <[email protected]> >> wrote: >> >> The Airgateway Installer with a POE crossover cable would work with >> enough power coming through whatever you're using to power it. >> >> Matt wrote: >> >> Does anyone know of a device that takes USB power source and converts >> it too 24v POE output for Canopy SM? >> >> --- >> This email has been checked for viruses by AVG. >> http://www.avg.com >> >> >> >> >> > >
