Nevermind... I see the pinout on the spec sheet. If you're using it, I guess it works... but it's definitely not the same pinout as the stock PoE.
On Mon, May 1, 2017 at 3:41 PM, Mathew Howard <[email protected]> wrote: > Yeah, it's basically just the really early ones that will only work on > 24v. As far as the pinout goes, +1/2,4/5 & -7/8,3/6 is definitely the > correct pinout... I've never tried another pinout, or heard of another > pinout working but I wouldn't be terribly surprised if it does work. > They'll certainly run on just +4/5 & -7/8. > > Are you sure about the pinout on that injector? I don't see any pinout > listed on the spec sheet. > > On Mon, May 1, 2017 at 3:00 PM, Josh Baird <[email protected]> wrote: > >> Any new-ish AF5X can take 48VDC [1]. >> >> [1] https://community.ubnt.com/topic/188588/af-x-poe-voltage-range-s >> >> On Mon, May 1, 2017 at 3:52 PM, Carl Peterson <[email protected] >> > wrote: >> >>> I remember reading somewhere that the newer AF5Xs could be powered by >>> 48V as well as 24V but I can't seem to find that source anymore. I am also >>> a little confused on the POE pinout. The Spec sheet says 1,2,4, 5 + and >>> 3,6,7,8 - but we have Airfibers powered with TP-DCDC-4856G-VHP injectors >>> that are 3,4,5,6 + and 1,2,7,8 - . What am I missing here? >>> >> >> >
