They are Mylar shielded cat5 cables   If you mean in conduit though no they are 
not in conduit.   

If someone thinks the ferrite solution is worth a try what ferrite do you use.  
Clamps or rings?  One end of the cable or both?  If rings, how many loops of 
cable through them?

Sent from my iPhone

> On Jun 7, 2017, at 09:10, Bill Prince <part15...@gmail.com> wrote:
> 
> Are the cat5 runs shielded? We've seen 100 Mbps ethernet can radiate in 
> the 140 MHz range. Shielding usually fixes it.
> 
> bp
> <part15sbs{at}gmail{dot}com>
> 
>> On 6/6/2017 1:17 PM, Craig House wrote:
>> We have equipment located on to Towers one is a water tower the other is a 
>> guyed110 foot tower. In both locations there are two way repeaters located 
>> on the towers that are receiving interference from what appears to be our 
>> equipment. Nothing is substantially common between the way the two towers 
>> are built out. The water tower had all of the equipment on top of the tower 
>> at one point and we have since moved all of our backhauls down to the 
>> catwalk railing on the opposite side of the tower from the two-way repeater 
>> attempting to put some distance between our equipment and the repeater but 
>> has not solve the problem.
>> We have ePMP both 2.4 sectors and the 5 GHz Omni as well as some ubiquity 
>> air fiber five and Power beam M5 radios on the water tower all running off 
>> of net tonics 24 port switch and the microtik router. The other Tower has 
>> only a few m5 radios and and M2 Omni. It also has an air fiber 5X amount of 
>> lower on the Tower around 55 feet. Everything on this Tower has ethernet 
>> cable's running to the base where our equipment is running from an old CMM 
>> micro or their own power supplies in the case of the air fiber. Everything 
>> at this Tower is located inside of a metal communications cabinet at the 
>> base. In both locations we have removed old 900 FSK radios which were a 
>> source of interference but the problem seems to have come back. I'm looking 
>> for ideas on what others have found may be the source of interference or 
>> solution because I'm tired of throwing darts blindfolded and hoping I find 
>> the right Target.
>> 
>> Sent from my iPhone
> 

Reply via email to