it might never looked up the back story on that. typically on optic sheets it will list 2 identical optics only difference is the environmental labeled c or i tmp
Carlos Alcantar Race Communications / Race Team Member 1325 Howard Ave. #604, Burlingame, CA. 94010 Phone: +1 415 376 3314 / [email protected]<mailto:[email protected]> / http://www.race.com<http://www.race.com/> ________________________________ From: Af <[email protected]> on behalf of Adam Moffett <[email protected]> Sent: Monday, June 12, 2017 2:42:26 PM To: [email protected] Subject: Re: [AFMUG] Temperature and SFPs I would have assumed "i" meant industrial and "c" meant commercial. ------ Original Message ------ From: "Carlos Alcantar" <[email protected]<mailto:[email protected]>> To: "[email protected]" <[email protected]<mailto:[email protected]>> Sent: 6/12/2017 5:41:26 PM Subject: Re: [AFMUG] Temperature and SFPs yes there is a difference there are i and c temp optics. The way I always keep them straight in my head is c is for colo meaning indoor rated. Carlos Alcantar Race Communications / Race Team Member 1325 Howard Ave. #604, Burlingame, CA. 94010 Phone: +1 415 376 3314 / [email protected]<mailto:[email protected]> / http://www.race.com<http://www.race.com/> ________________________________ From: Af <[email protected]<mailto:[email protected]>> on behalf of Adam Moffett <[email protected]<mailto:[email protected]>> Sent: Monday, June 12, 2017 1:15:30 PM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Temperature and SFPs I was told by a Trango sales rep that they had seen packet loss at low temperatures with some SFP's, and that was why I should buy the JDSU model they recommend. I took their word for it and bought the JDSU. ------ Original Message ------ From: "Nate Burke" <[email protected]<mailto:[email protected]>> To: "Animal Farm" <[email protected]<mailto:[email protected]>> Sent: 6/12/2017 11:23:24 AM Subject: [AFMUG] Temperature and SFPs >I was just looking around at 10g SFP's, I saw that the MaxxWave brand >list 0c-70c as operating temperature, and the Mikrotik and UBNT modules >list no temperature range at all. Are SFP's really temperature >dependent? I'm more worried about cold than heat. I had a couple >edgepoints with 10g Maxxwave modules out over last winter without any >issues, but it was rather mild.
