I believe this is correct but vlan 502 will end up on the ethernet of
the SM. essentially having the Sub on vlan501 and 502 will be looking
for an interface on the other end of the sub matching it.
If you plug a pc into the sub direct all it will see is 501. If a switch
is plugged in with a vlan tag of 502 it will connect vlan 502 all others
will pass over 501.
hope that helps
I do this with a few subs.
On 6/14/2017 2:21 PM, Carl Peterson wrote:
If I have a SM set for QinQ with the SVLAN set, will it put any VLANS
that ingress the SM inside the S VLAN or only the default port VID and
any MAC->VLANS that are set on it? i.e if I have the default port VID
set to 501, and the S VLAN set to 600, it puts 501 inside S VLAN 600
but if a tagged packet ingresses, 502 for example, will it also be put
inside S VLAN 600? I don't have a CSM/AP set up in my lab right now
and I'm working on a config.
--
