Re-posting. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected] ----- Original Message ----- > From: "cdewey" <[email protected]> > To: "Faisal Imtiaz" <[email protected]> > Cc: [email protected] > Sent: Saturday, July 1, 2017 11:20:43 PM > Subject: Re: [AFMUG] Metrolinq power > Thanks Faisal. > > Robert, our first gen equipment (ML-60-XX) is all 24V 1.5A. If running a > netonix > with it we recommend 24VH. Many people run 24V without issue. > > Our next generation equipment (ML2.5-60-XX) and subsequent releases will all > be > 24-48v DC or PoE. For these 24VH will be a must but 48V is probably ok but has > not been tested yet. > > Thanks, > > Chad Dewey > >> On Jul 1, 2017, at 6:45 PM, Faisal Imtiaz <[email protected]> wrote: >> >> I am sure Chad can answer this question.. >> >> It looks like the 24v/48v is only for the newer Metrolinq 2.5 other versions >> are still showing 24v on their spec sheets. >> >> >> Regards. >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >> >> ----- Original Message ----- >>> From: "Robert Andrews" <[email protected]> >>> To: [email protected] >>> Sent: Saturday, July 1, 2017 4:00:36 PM >>> Subject: [AFMUG] Metrolinq power >> >>> Probably been asked and answered before, but I read that the 60 says >>> 24/48V 1.5 amp. So is it 1.5 amp at 24V and .75 amp at 48V? are >>> people running these off Netonix and if so are they running them off the >>> 48V .75 or 48V HV? >>> >>> Thanks for any answers.... I trust you guys more than anywhere else.. >>> >>> > >> Robert
