Is RX sensitivity on the 450i AP the same as the 450i SM? Is it the same hardware? Also what is original 450AP rx sensitivity as well? I noticed that when I swapped out 450AP for 450iAP that I got better uplink speeds.
Also will 450b SM accept 48v on the POE? On Fri, Jul 28, 2017 at 12:28 PM, Joe Falaschi <[email protected]> wrote: > We’re looking at some questions of why certain links are at certain > modulations (uplink is better than downlink). It’s explained by the spec > sheet of the current equipment and RX sensitivity. Basically the 450M AP > can do more with less signal than the CPE can. Specs below. In any case > we were then wondering what the new 450b RX sensitivity would be. There is > a spec sheet on the Cambium website but this isn’t listed. Anyone have > this information? > > 450M AP RX sensitivity > 1x = - 93.5 dBm > 2x = -88.6 dBm > 4x = -81.5 dBm > 6x = -75.9.0 dBm > 8x = -67.8 dBm > > 450SM RX sensitivity > 1x = -84 dBm > 2x = -80.5 dBm > 4x = -74 dBm > 6x = -66.9 dBm > 8x = -56 dBm > > 450i SM RX sensitivity > 1x = -85.9 dBm > 2x = -81.5 dBm > 4x = -75.8 dBm > 6x = -69.3 dBm > 8x = -61.6 dBm > > Joe Falaschi > e-vergent
