Title: Re: [AFMUG] PLC Splitters
Adam,

FWIW - We have bought a bunch these (
http://www.fs.com/products/11526.html) from 1x2 to 1x32 to splice directly in our hand holes.  No issue splicing them to standard 144 or 216 ncable.

--
Best regards,
Mark                            
mailto:m...@mailmt.com

Myakka Technologies, Inc.
www.MyakkaTech.com

Proud Sponsor of the Myakka City Relay For Life
http://www.RelayForLife.org/MyakkaCityFL

Please Donate at Please Donate at http://www.myakkatech.com/RFL.html
------

Thursday, August 10, 2017, 6:11:33 PM, you wrote:


I dunno bro, it's all I could think of.


------ Original Message ------
From:
ch...@wbmfg.com
To: af@afmug.com
Sent: 8/10/2017 6:10:35 PM
Subject: Re: [AFMUG] PLC Splitters


Didn’t know that was the diameter of the paint.  Seems like an odd thing to spec on a splitter as you always strip that off.  

From: Adam Moffett
Sent: Thursday, August 10, 2017 4:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] PLC Splitters

A "bare fiber" pigtail has 250um acrylic coating.


------ Original Message ------
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 8/10/2017 6:07:52 PM
Subject: Re: [AFMUG] PLC Splitters


That sounds strange to me.  

Is there such a thing as PON on multi mode fiber?

From: Jason McKemie
Sent: Thursday, August 10, 2017 3:37 PM
To: af@afmug.com
Subject: [AFMUG] PLC Splitters

I'm looking to possibly do a trial GPON deployment on a leg of my active network, it looks like the FS.com PLC Splitters are 250µm.  However, singlemode fiber is usually spec'd at a cladding of 125µm.  Are they just using a different measurement or some sort of oddly sized fiber?

-Jason

Reply via email to