FTTFTTFFTF (The answers to a biology quiz in High School) From: Josh Reynolds Sent: Tuesday, August 15, 2017 4:50 PM To: [email protected] Subject: Re: [AFMUG] AF24 issues after switching to PowerInjector
Up, up, down, down, left, right, left, right, t568a, t568b, t568a, t568b, select, start! On Aug 15, 2017 5:46 PM, "Kurt Fankhauser" <[email protected]> wrote: Yes that was the first thing I did, the jumpers all alternate like up/down/up/down/up or its reverse of that, I forget On Tue, Aug 15, 2017 at 6:30 PM, Forrest Christian (List Account) <[email protected]> wrote: Have you added the additional jumpers needed to power all 4 pairs? On Tue, Aug 15, 2017 at 3:00 PM, Kurt Fankhauser <[email protected]> wrote: I have had an AF24 up for over a year now with no issues while running the factory supplied POE. I switched the AF24's all at the site over to a single PacketFlux PowerInjector and just in 2 weeks time the AF24 has locked up once and needed hard power cycled and this latest problem it seems to have issues on the SNR on the Ethernet pairs. (see attached photo). Now I rebooted it from the GUI and it came back perfect without showing Ethernet problems but just wondering what is going on here. I have 2 other AF24's running from the same PowerInjector and they are not having any issues. Only other thing that I am thinking might need done is grounding the lug on the PowerInjector labeled "shield" as right now there is no way for the outer jacket of Ethernet cable to ground itself. Don't know if that could be causing this or not. -- Forrest Christian CEO, PacketFlux Technologies, Inc. Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected] | http://www.packetflux.com
