I’m guessing that’s actually 1 pair, unless you have another freq pair specified but it would be a single pair at 80MHz.
Brandon Shiers, RF Engineer In Training 937 West Main Street Riverton, WY 82501 307.857.6704 (o) 307.840.2366 (c) 307.856.1499 (f) [email protected]<mailto:[email protected]> [http://www.cerento.com/emailsignatures/logo.jpg] From: Af [mailto:[email protected]] On Behalf Of Steve Jones Sent: Thursday, August 17, 2017 10:02 AM To: [email protected] Subject: Re: [AFMUG] Figuring out what our FCC application says so for one site there is 11245 77M0D7D (A) and 10755 77M0D7D (A) I can assume this is 2x80? On Thu, Aug 17, 2017 at 10:57 AM, Brandon Shiers <[email protected]<mailto:[email protected]>> wrote: The emission designator will have the channel size in it. For example a designator of 40M0W7D is a 40 MHz channel. Brandon Shiers, RF Engineer In Training 937 West Main Street Riverton, WY 82501 307.857.6704<tel:(307)%20857-6704> (o) 307.840.2366<tel:(307)%20840-2366> (c) 307.856.1499<tel:(307)%20856-1499> (f) [email protected]<mailto:[email protected]> [Image removed by sender. http://www.cerento.com/emailsignatures/logo.jpg] From: Af [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Steve Jones Sent: Thursday, August 17, 2017 9:53 AM To: [email protected]<mailto:[email protected]> Subject: [AFMUG] Figuring out what our FCC application says So we have completed the PCN on a couple mimosa B11 links (so very, very unimpressed with these radios interface and function) We went through comsearch. Trying to configure this, Im not sure what channel settings to put in. I went to the application, I see the centers, but no size. Is there a code on here that tells me what channel size we are applying for? And I notice the Application says the radio does not have ATPC, I thought these did, maybe im wrong
