No the whole point of these is air pressure and condensation release, it's not under pressure in shipment.
On Aug 26, 2017, at 2:56 PM, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> wrote: If they are shipped in the non pressurized hold of an aircraft it could cause the pop off. From: Steve Jones Sent: Saturday, August 26, 2017 3:44 PM To: [email protected] Subject: Re: [AFMUG] mimosa b11 On Aug 26, 2017 10:54 AM, "Jaime Fink" <[email protected]> wrote: Pretty sure support can send you a spare of the IP67 gore vent. It's extraordinarily rare that the top cap of the vent pops off in the box, first one I've heard of myself, and you don't want to tape it up as any air pressure would just pop the tape off and any condensation or moisture wouldn't be able to escape. Just contact them on chat on our site. Jaime On Aug 26, 2017, at 8:39 AM, Steve Jones <[email protected]> wrote: The little black cover fell off, the retention nuts still there. These will blow off in the wind anyway, i just wont tape over it. I figure when it falls off in the box, its not staying on anywhere On Aug 26, 2017 10:28 AM, "Faisal Imtiaz" <[email protected]> wrote: It is a pressure relieve valve and also a moisture drainage hole.. Don't mess with it, don't cover it .. leave it alone. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232<tel:(305)%20663-5518> Help-desk: (305)663-5518<tel:(305)%20663-5518> Option 2 or Email: [email protected] ________________________________ From: "Steve Jones" <[email protected]> To: [email protected] Sent: Friday, August 25, 2017 5:28:36 PM Subject: Re: [AFMUG] mimosa b11 what is the little black cap between the two ports on these? one came off and i cant figure out what that is and whether to tape it up or what On Fri, Aug 25, 2017 at 3:01 PM, Rory Conaway <[email protected]> wrote: If you can hang a B5 radio, you can hang a B11. Hell, if you can program a Nanostation Loco, you can hang a B11 and make it work. That’s what I call efficiency in terms of training. Rory From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds Sent: Friday, August 25, 2017 12:25 PM To: [email protected] Subject: Re: [AFMUG] mimosa b11 What I'm getting at is deploying a product without product specific knowledge is not normally a good thing. I understand a radio isn't exactly a rocket ship, but still... PS - Can we have out daily use jetpacks yet? On Aug 25, 2017 2:10 PM, "Rory Conaway" <[email protected]> wrote: It’s a huge thing in terms of training and availability if there is a field issue. Rory From: Af [mailto:[email protected]] On Behalf Of Josh Reynolds Sent: Friday, August 25, 2017 9:42 AM To: [email protected] Subject: Re: [AFMUG] mimosa b11 That's not necessarily a good thing. On Aug 25, 2017 10:04 AM, "Rory Conaway" <[email protected]> wrote: Seriously, every guy in my company can deploy a B11 with no training versus the crap we went through with Dragonwave and you are complaining about that? Rory From: Af [mailto:[email protected]] On Behalf Of Steve Jones Sent: Friday, August 25, 2017 7:29 AM To: [email protected] Subject: Re: [AFMUG] mimosa b11 I need 2 if im chucking the first one out the window On Aug 25, 2017 8:39 AM, "Rory Conaway" <[email protected]> wrote: BTW, you also only need 1 radio for a spare, not 2. Rory From: Af [mailto:[email protected]] On Behalf Of Steve Jones Sent: Thursday, August 24, 2017 7:19 AM To: [email protected] Subject: Re: [AFMUG] mimosa b11 Thats the gui im saying mimosa makes look good On Aug 24, 2017 8:56 AM, "Chuck McCown" <[email protected]> wrote: Did you ever use the original ePMP? From: Steve Jones Sent: Wednesday, August 23, 2017 10:54 PM To: [email protected] Subject: Re: [AFMUG] mimosa b11 ill have to look into browser by clunky I mean slow to load, multiple instances where it went to the login screen for no reason, a junk gui to me is indicative of the gears quality, unless the gear is designed for cli and gui is an afterthought at least its not java, ill give it that I guess I'm just babied on saf, fast, never an issue with the interface. On Wed, Aug 23, 2017 at 11:24 PM, Rory Conaway <[email protected]> wrote: Steve, you are mistaken on a couple of things. I’m not sure how you say it’s clunky. It’s pretty easy, as are most of the vendors GUI’s. As for our statement about the road trip, that is completely false. If the AP is on the connection side, the client side will always search and connect. Every manufacturer ships with older firmware so again, I don’t see how that is any different than anyone else. As for the SSID, you have to use Chrome. If you use IE, then the save button doesn’t pop up. Chrome lets you type in whatever you want. Rory From: Af [mailto:[email protected]] On Behalf Of Steve Jones Sent: Wednesday, August 23, 2017 8:55 PM To: [email protected] Subject: [AFMUG] mimosa b11 very unimpressed thus far and theyre just sitting on my living room floor web interface is so clunky, pretty well guarantees if a link has any issue no getting to the other side to reboot it, definite road trip, glad these are going in a redundant path essids reverting to factory... awesome I can guarantee we will need two spares because the first time I'm going to do a replacement after a storm in inclement weather and this stupid 30 minute process of activating, loading firmwares, all that, the first ones getting chucked through a window seriously, you have to scan essid? you cant just put it in, how freaking stupid is that. now I haven't checked the maps, but I'm pretty confident theres no 11ghz link going through my house, so a noise floor in the low 80s is pretty suspect. wondering if my 5ghz ap is the source of that "11ghz" fucking upconverts, I should have researched more the blazing fast speed of the interface is making me have some respect for the epmp reboot time on this "carrier class" product is outstanding, pretty sure if I ever have to reboot in production ill have time to drive to everybodys house and let them know whats going on before it comes back up. I do like that radiowaves has a mimisa interface for the hp line of antennas though, so if need be ill just pull it off and put a saf interface on.
