I don't think there's default plug support on the aux port. Because it's
not needed. Same as the 450i. Give it a quick 1-2 second power cycle.
That will make the boot loader pause for I think 30 seconds. Open your
browser to 169.254.1.1 and you'll see the reboot to defaults option. You
might have to power cycle once, leave it on for about 10 seconds, and
then do the 2 second cycle. Been a while since I had to do that on a 450i.
On 8/28/2017 12:38 PM, Carl Peterson wrote:
What are the default pins on a 450m with POE out set on the aux port. It is
set to use the SFP but I'm getting nada on that port even with a patch cable
and their SFP. It links fine but is sending zero packets. Hopefully with a
reset it will at least work on the copper port.
