Thanks for this, we were unsure and just replaced it with a 430/320 injector. Good to know we can do this by making a cable.
Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com<http://www.silowireless.com/> Wireless | Fibre | VoIP | PBX | IPTV _________________________________ The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited. From: Af <[email protected]> on behalf of "Forrest Christian (List Account)" <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Friday, September 8, 2017 at 9:54 PM To: af <[email protected]> Subject: Re: [AFMUG] Packetflux Gig Sync injector - 320 wimax. - Jumpers? With the 320 and 430 you have two options: 1) Buy a 10/100 injector, and re-jumper it. 2) Use a gigabit injector off the shelf with the cable described in the cambium manual. The cable in the cambium manual is the one from a CMM4 to a 450i. Because we use 'normal' pinning on our gigabit injectors, the cable is not needed with the 450i, but is needed with the 320 and 430. The reason for this is that the 320 and 430 do not use a standard pinning. Worse, the pinning is not compatible with gigabit powering schemes which all require the same polarity and voltage on both wires in the pair - the 320 and 430 use a different polarity on each pair. On Fri, Sep 8, 2017 at 11:40 AM, Andreas Wiatowski <[email protected]<mailto:[email protected]>> wrote: Do I need to do any special jumpering on the new GB injector to power Cambium 320? Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600<tel:(866)%20727-4138> http://www.silowireless.com<http://www.silowireless.com/> Wireless | Fibre | VoIP | PBX | IPTV _________________________________ The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited. -- Forrest Christian CEO, PacketFlux Technologies, Inc. Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 [email protected]<mailto:[email protected]> | http://www.packetflux.com<http://www.packetflux.com/> [mage removed by sender.]<http://www.linkedin.com/in/fwchristian> [mage removed by sender.] <http://facebook.com/packetflux> [mage removed by sender.] <http://twitter.com/@packetflux>
