I saw a nice automatic aiming mount made by Winegard:
http://www.winegard.com/wireless?q=enterprise

Never checked on the price, but it sure looks expensive.


On Sat, Sep 9, 2017 at 11:59 AM, Rory Conaway <[email protected]>
wrote:

> Mesh vendors aside,
>
> Peplink used to make a device specifically for this application you run on
> a mobile device.  It has dual radios, one to connect, one to look ahead and
> connect to the next AP, no drop off off connection.  Unfortunately, they
> are discontinued.
>
> What you can do though, is use a Peplink router with 2-3 WAN connections,
> put up 3 wireless omni antennas on the boat, each one assigned to a
> different SSID on shore.  Use a Peplink on shore and create a VPN tunnel
> across all 3 links.  The Peplink will automatically load-balance each of
> the 3 connections as they drop on/off.
>
> Not a cheap solution but it works.  If 30Mbps is sufficient, the routers
> start at around $400, you would need 2.
>
> Rory
>
>
>
>
> *From:* Af [mailto:[email protected]] *On Behalf Of *Adam Moffett
> *Sent:* Saturday, September 9, 2017 7:53 AM
> *To:* [email protected]
>
> *Subject:* Re: [AFMUG] Link to Large Boat
>
>
>
> I don't think any of the WISP priced Wimax or LTE stuff has decent roaming
> capability.  At least not the ones I have worked with.
>
>
>
> Technically a mobile device on an NN license is supposed to be limited to
> +2db Tx power.  I doubt any enforcement happens with NN, but I'm just
> throwing it out there.
>
>
>
>
>
>
>
> ------ Original Message ------
>
> From: "Lewis Bergman" <[email protected]>
>
> To: [email protected]
>
> Sent: 9/7/2017 11:50:45 AM
>
> Subject: Re: [AFMUG] Link to Large Boat
>
>
>
> Putting aside the sub question and RF for the moment, I would suggest
> creating a separate subnet shared across all three routers joined by EOIP
> for just this specific case. If the 3 routers share an upstream this might
> be the best place for the gateway for the subnet. This *should* let you
> roam across them at least without completely losing the stream. There is
> still rereg time. Of course, mobile protocols have this sort of thing built
> in so WiMAX, as much as I dislike it, and LTE both make allowances for this
> to different degrees. You will have to hope the rereg time doesn't exceed
> the buffer.
>
>
>
> The SM's flipping back and forth would be a big killer I would think. Boat
> hits waves, starts to rock, SM's start to flip back an forth between AP's.
> Sounds like something I want my competition to support instead of me. That
> is of course, unless there is just to much money at stake to resist.
>
>
>
>
>
> On Thu, Sep 7, 2017 at 10:08 AM Craig House <[email protected]>
> wrote:
>
> Stupid voice to text it should've said turn the Omni upside down. ??
>
> Sent from my iPhone
>
> > On Sep 7, 2017, at 10:08, Craig House <[email protected]> wrote:
> >
> > Turning on the upside down. ??
> >
> > Sent from my iPhone
> >
> > > On Sep 7, 2017, at 09:58, Dave <[email protected]> wrote:
> > >
> > > Ok, either I am getting to old for these crazy challenges or I am
> subjecting my self to motivation I have not figured this one out yet LOL
> > >
> > > We have a large site seeing Boat that sits on one of our lakes which
> navigates north and south of the lake and some to the east.
> > > We have 3 towers that can easily see a majority of the lake. One tower
> can see most of the north end and the other 2 can see south and east.
> > >
> > > So the challenge is to provide a content streaming connection to this
> boat which moves slowly across the lake.
> > > My answer first was use an omni on 3Ghz but the omni has downtilt
> built in so thats a no go.
> > > The plan B was to use a 4 cluster of integrated subscribers to talk to
> the towers.
> > > The next question would be if these subs are able to move from one ap
> to the next.
> > > How would you connect them to a router IE:RB493G to provide a single
> seemless connection in the boat?
> > >
> > > Im open to anything at this point. Oh yeah there is a Mobile hotspot
> for failover.
> > >
> > > I think I know the answer but wanted to see what others would do.
> > >
> > > Thanks
> > > Dave
> > >
> > > --
> > > <Vcard.jpg>
>
>

Reply via email to