Or notes in the gigE powerinjector that says it works with *this radio *that radio *the next radio
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Sep 11, 2017 at 3:11 PM, Mathew Howard <[email protected]> wrote: > You might want to consider renaming it or something, because it does tend > to give the impression that you need something special for an airFiber. > > On Mon, Sep 11, 2017 at 1:37 PM, Forrest Christian (List Account) < > [email protected]> wrote: > >> You're close. The AirFiber came out because I expected it to need more >> power than the 4 or 8 port port poe could handle. >> >> Nowadays it's just a single port version of the gige powerinjector, >> complete with internal jumpers, minus the sync. >> >> >> >> On Sep 11, 2017 11:41 AM, "George Skorup" <[email protected]> >> wrote: >> >> I want to say the single-port AF injector came out before Forrest had the >> 4/8-port GigE injectors done. Or maybe even before they were designed. And >> that's simply because of the GigE + 4-pair injection scheme. That was one >> of the few radios at the time that required 4 pairs because of the power >> consumption. >> >> Forrest said the newer relays he's using on the GigE 4/8-port injectors >> will handle the current fine. The older orange Omron relays not so much. >> I've burned up quite a few of them over the years. Luckily they're not too >> difficult to replace. >> >> I'd just use a GigE PowerInjector+Sync these days. You get 2A per port >> using 4-pair injection. Plus solid-state over-current protection. Or the >> 5ch PDU and GigE-POE-APCs. There are many good options now. The >> RackInjector is gonna be awesome. And I hope to see the 12-port >> PowerInjector+Sync later for the smaller cabinets. Fuses and wiring drives >> me nuts. >> >> >> On 9/11/2017 12:08 PM, Adam Moffett wrote: >> >> It so happens an AF24 is exactly what I'm looking at. >> >> >> ------ Original Message ------ >> From: "Mathew Howard" <[email protected]> >> To: "af" <[email protected]> >> Sent: 9/11/2017 12:56:13 PM >> Subject: Re: [AFMUG] Packetflux Airfiber POE >> >> If I remember correctly, the 4 port works fine. I think the reason for >> the special one was because the airFiber 24 draws so much power, but if I >> remember right, it was determined later on that the normal injectors would >> handle it fine (and I'm pretty sure I had one running on one at one point). >> It certainly wouldn't be an issue with anything other than the 24ghz >> airfbers anyhow, since the others all use a lot less power. >> >> On Mon, Sep 11, 2017 at 11:40 AM, Adam Moffett <[email protected]> >> wrote: >> >>> I'm wondering why there is a special AirFiber POE device for >>> Packetflux. Will AirFiber not work with the 4 port gigE POE adapter? >>> >>> >> >> >> >
