I think he means incoming. Maybe try a different ATA. I'm positive I
had one or two that failed in some way that they wouldn't the send the
caller ID data anymore. Those were Motorola.....not sure it ever
happened to us on a Cisco.
------ Original Message ------
From: "can...@believewireless.net" <p...@believewireless.net>
To: "af@afmug.com" <af@afmug.com>
Sent: 11/7/2017 4:16:39 PM
Subject: Re: [AFMUG] ATA CallerID question
The outbound CID should be set in the PBX, not the ATA.
On Tue, Nov 7, 2017 at 3:58 PM, Nate Burke <n...@blastcomm.com> wrote:
At a customer, I just hooked up a Cisco SPA122 into an Ancient Lucent
PBX system. The customer says that caller ID is not coming through,
but it used to work with his old AT&T Lines, and it appears to be
hitting the ATA Properly. Is there a setting on the ATA that needs
to be set that older systems may be looking for?
The only settings I see for Caller ID in the ATA are Caller ID Method,
currently set to 'Bellcore(N.Amer,China)' and Caller ID FSK Standard,
set to 'Bell 202' I've never had to mess with those settings before.
Nate
