Well you are in luck for next time because the MSRP is only $395!
-----Original Message-----
From: Robert
Sent: Sunday, December 3, 2017 11:37 AM
To: [email protected]
Subject: Re: [AFMUG] POE Fusing
I could have used one of those two days ago when I plugged into a cat5
with 48HV 1.5, the wire checked out fine with the tester in the Netonix
with opens at the length of all the wires. But turned on the power and
poof, there goes a 12-250-DC... Totally dead... Right now I would
say one of those is worth $400... I also have a wire to test it out
with LOL... Next time I'll test every wire with a mini before trying
anything bigger... BTW I would suggest using a mini for your test
bench too, and if you blow that it's less painful...
Robert
On 12/3/17 9:42 AM, [email protected] wrote:
Running some endurance tests on the latest rev of the inline POE fuse.
Netonix is providing the power.� Inline POE fuse connected to short red
CAT5 with LEDS.� 2 Green LEDs on one side and 2 Red on the other.� If
it blows, the output side LEDs go out but the input LEDS stay lit.� You
can hook it up either direction.
Big brown power resistor hanging from a wire is the load.� It is
roasting hot too.� 53 volts x 1.5 amps = almost 80 watts.
