Regardless what you do you have to test and hope.
We have a Lumina Link with builtin fiber. On one side a netonix-switch with a Mikrotik SFP had the problem that Lumina shows half-duplex and some errors. After upgrading Netonix this seems to be ok. Upgrading the Lumina make the connection on the other side (KTI-Switch with LevelOne SFP) fail while the Netonix side still works. Links up but no data flow. Downgrading the Luminas made it working again. So there are different kinds of incompatibility and they depend on used Firmware. Where possible I use good old Ethernet … Von: Af [mailto:[email protected]] Im Auftrag von Steve Jones Gesendet: Dienstag, 19. Dezember 2017 16:12 An: [email protected] Betreff: [AFMUG] SAF SFP compatibility with Mikrotik ccr1072 we are quoted I0AOM001 - N on an integra link. I dont see this module listed on the mikrotik compatibility chart. Has anybody here used them with the ccr1072? I apparently need to do LACP bonding as well. Im debating on whether to do this in our procurve switches (which seem compatible with everything) or to do it in the router directly Never done it so i dont know if its a good idea to combine mikrotik quirks with unknown compatible modules with a technique Ive never done
