Thanks Eric, yes a wave on a carriers DWDM chassis. That takes us back to my original question. LAN PHY vs WAN phy. Is there any reason to use WANPHY assuming I am just connecting a couple of MXs in two different data centers? My thinking is no but I put this out after a couple providers came back with WANPHY on their quotes.
On Tue, Dec 19, 2017 at 6:03 PM, Eric Kuhnke <eric.kuh...@gmail.com> wrote: > If you're describing a wave service provisioned on a carrier's DWDM > chassis, for 10G, the ethernet handoff on each side will almost certainly > be 1310nm/LX. You also need to understand whether it's been built using > LANPHY or WANPHY (eg: is it an OC192 built on a legacy system or is it a > native 10Gb Ethernet circuit). > > > > > > On Tue, Dec 19, 2017 at 2:42 PM, Carl Peterson <cpeter...@portnetworks.com > > wrote: > >> This is specifically a wave and not L2 ethernet or MPLS. Also not dark. >> We lease a lot of metro dark but this is a regional connection and I have >> no need or budget for a whole strand on this path. >> >> I wouldn't mind colored optics, but this is a pretty heavy regional route >> and I doubt anyone is running passive DWDM on it. >> >> On Tue, Dec 19, 2017 at 5:15 PM, Faisal Imtiaz <fai...@snappytelecom.net> >> wrote: >> >>> You should ask your provider, what is being handed to you.. >>> Terminology means little.... >>> >>> Are you purchasing a lit circuit ? or a dark fiber / dark channel ? >>> >>> If it is a lit circuit, you can expect / specify the hand-off on either >>> SMF or MM optics (SMF is more and more common). >>> If you are getting a Dark Fiber / Dark Channel, then ask them what type >>> of optics you need. >>> >>> I highly doubt that you are being sold a dark fiber / dark channel.. >>> very likely 10g Lit circuit.. (many carriers use the term Wave to >>> differentiate between Ethernet / MPLS circuits). >>> >>> Regards. >>> >>> Faisal Imtiaz >>> Snappy Internet & Telecom >>> http://www.snappytelecom.net >>> >>> Tel: 305 663 5518 x 232 <(305)%20663-5518> >>> >>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: >>> supp...@snappytelecom.net >>> >>> ------------------------------ >>> >>> *From: *"Carl Peterson" <cpeter...@portnetworks.com> >>> *To: *af@afmug.com >>> *Sent: *Tuesday, December 19, 2017 1:00:54 PM >>> *Subject: *[AFMUG] 10g wave lan phy vs 10g wan phy >>> >>> We are about to sign a contract on a 10G wave and I'm trying to figure >>> out what the wan phys should be and whats the difference. I'm assuming we >>> would want lan phys. >>> Does this make sense and would we just use normal 10G optics on each >>> end? >>> >>> >>> -- >>> >>> Carl Peterson >>> >>> *PORT NETWORKS* >>> >>> 401 E Pratt St, Ste 2553 >>> <https://maps.google.com/?q=401+E+Pratt+St,+Ste+2553+Baltimore,+MD+21202&entry=gmail&source=g> >>> >>> Baltimore, MD 21202 >>> <https://maps.google.com/?q=401+E+Pratt+St,+Ste+2553+Baltimore,+MD+21202&entry=gmail&source=g> >>> >>> (410) 637-3707 >>> >>> >> >> >> -- >> >> Carl Peterson >> >> *PORT NETWORKS* >> >> 401 E Pratt St, Ste 2553 >> <https://maps.google.com/?q=401+E+Pratt+St,+Ste+2553+Baltimore,+MD+21202+%3Chttps://maps.google.com/?q%3D401%2BE%2BPratt%2BSt,%2BSte%2B2553%2BBaltimore,%2BMD%2B21202%26entry%3Dgmail%26source%3Dg%3E&entry=gmail&source=g> >> >> Baltimore, MD 21202 >> <https://maps.google.com/?q=401+E+Pratt+St,+Ste+2553+Baltimore,+MD+21202+%3Chttps://maps.google.com/?q%3D401%2BE%2BPratt%2BSt,%2BSte%2B2553%2BBaltimore,%2BMD%2B21202%26entry%3Dgmail%26source%3Dg%3E&entry=gmail&source=g> >> >> (410) 637-3707 >> > > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707