yes, I was going to ask since typically 30a will result in 100Mbps x 100 Mbps (rather than 100 x 50), at MDU loop lengths, unless the wiring is terrible in the building.
On Tue, Jan 16, 2018 at 8:23 PM, Rob Genovesi <r...@corp.coastside.net> wrote: > Good question! Ours is at 17a (the default). 30a is unnecessary > because we're rate limiting lower speeds (capacity constrained by > microwave back haul). > > > > > On Tue, Jan 16, 2018 at 6:09 PM, Eric Kuhnke <eric.kuh...@gmail.com> > wrote: > > Are you using a 17a or 30a profile with that? > > > > On Mon, Jan 15, 2018 at 9:56 AM, Rob Genovesi <r...@corp.coastside.net> > > wrote: > >> > >> Sam, > >> > >> Modems are syncing at ~100 Mbps DL and ~50 Mbps UL. We rate limit > >> with a Mikrotik at the head-end. Loop lengths are very short, under > >> 1kft. We use SmartRG modems (SR515ac) which are integrated > >> modem/Wi-Fi routers. > >> > >> > >> -Rob > >> > >> > >> On Mon, Jan 15, 2018 at 9:31 AM, Sam Lambie <samtaos...@gmail.com> > wrote: > >> > Rob, > >> > What speeds are you seeing to the CPE? > >> > What modems are you using? Do they have wireless capability or do you > >> > add > >> > another Router off of that? > >> > > > > > >