That cable is not shielded (so the shields would not be connected). The Gigabit PoE that comes with Cambium ePMP hardware has a full set of magnetics (all pairs).
------------------------------ On Mon, Jan 22, 2018 at 10:23 AM, Chuck McCown <[email protected]> wrote: > Is the cable shielded? > > *From:* Christopher Gray > *Sent:* Monday, January 22, 2018 8:17 AM > *To:* [email protected] > *Subject:* [AFMUG] Use Unpowered PoE Injector on Long Ethernet Runs? > > I have a customer with bizarre issues. I've replaced almost everything but > odd issues keep coming back. > > The customer has a 100' run of Ethernet cable from the house to the barn, > and a switch in the barn. I'm wondering if there might be an issue with > different power sources, possibly different grounds between the router and > the switch. The issues are intermittent enough that I can't ask for them to > just disconnect their barn as it is used for work. > > If I install an unpowered gigabit PoE injector in-line with that 100' run, > will that eliminate any issues with different power or different grounds > between different buildings since the buildings would be on separate sides > of the magnetics, or do I need better separation? > >
