I know it is outdoor shielded , but cat5e. We've been at this site about three years (ok, maybe six). They occasionally move more data than 10 meg and we get alerts gets are congested. I will see if we can add the loops. Where on the cable should the ferrite beads go?
----- Original Message ----- From: [email protected] To: [email protected] Sent: Tuesday, January 23, 2018 1:12 PM Subject: Re: [AFMUG] ferrite beads / radio station Before the plug on the cable ends. You can also make all CAT5 cables have about 5 turns of cable as a choke coil at each end too if you have enough slack. Shielded cable will help too. No need to ground it. I would focus on anything near the transmitter and FM transmitting system. From: CBB - Jay Fuller Sent: Tuesday, January 23, 2018 12:07 PM To: [email protected] Subject: [AFMUG] ferrite beads / radio station we are collocated with a radio station in another town that has been causing our ethernet speed to drop to 10 meg. i know we've discussed ferrite beads - - how should they be replaced on the cable to try to eliminate the noise causing us to negotiate at 10 meg? thanks the station is a low power fm - under 100 watts
