Need to replace failing Cisco switches..these are 24 port switches with only 4 to 6 ports needed.
Jaime Solorza On Jan 30, 2018 1:31 AM, "Lewis Bergman" <[email protected]> wrote: > Brocade is very close to Cisco. I think some of the defaults are different > so if things don't go as planned that is what I would check first. > > On Tue, Jan 30, 2018, 12:52 AM Dev <[email protected]> wrote: > >> Not sure about Brocade, but Juniper JunOS is quite a bit different, the >> hierarchy and structure is different enough that there’s a bit of a >> learning curve. >> >> However, if you really understand what’s happening in IOS (or RouterOS, >> etc.), or routing in general, you should be able to port the concepts to >> <other_router_os> since routing is routing, though Cisco (and Mikrotik and >> others) are fond of calling normal routing things something proprietary >> just to keep things confusing. >> >> Might you be able to tell us what kinds of things your Cisco is currently >> doing? >> >> >> >> >> Can I copy Cisco switch configuration and import to a Brocade or other >> switch? >> >
