If someone gets overzealous they can crush their wire flat. It definitely ain't coming out though.


------ Original Message ------
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:17:28 PM
Subject: Re: [AFMUG] tying down wires

Or leave the screws. Space it off the back of the box such that the holes line up with the connectors on the PCB.
Use the screws to clamp the wires.

From:Adam Moffett
Sent: Friday, February 9, 2018 4:15 PM
To:af@afmug.com
Subject: Re: [AFMUG] tying down wires

<pessimism>
Someone who knows what it is might try grounding with it. And they'll complain you didn't include the screws.
</pessimism>


------ Original Message ------
From: ch...@wbmfg.com
To: af@afmug.com
Sent: 2/9/2018 6:10:38 PM
Subject: [AFMUG] tying down wires

I wonder if I put one of these in the box:
https://www.homedepot.com/p/Eaton-14-Terminal-Ground-Bar-Kit-GBK14CS/100175627

with the screws removed, if that would be a suitable thing to tie off cables coming into the box to?


(not sure the image will come through)

Reply via email to