Have you checked your input wiring? No bad landings?
Is this an adjustable unit on output side? Not ever worked with meanwell so
forgive questions...

Jaime Solorza

On Feb 13, 2018 12:23 PM, "Robert Andrews" <i...@avantwireless.com> wrote:

> So I ordered two of the meanwell DRP-48-24's from two different
> vendors...   Hooked both of them up to AC.   They _Both_ sit there and
> pulse the DC out light and only output 20V unloaded and about 16 loaded
> with the output looking like it's switching on and off.   So I am telling
> myself the odds are long that I got two bad ones and it's probably
> something I'm not doing right.  Not enough load?   Need a battery in the
> load?   Anyone have any help here or is really two of them that are both
> bad?    input is connected to line correctly, verified with volt/ohm
> meter.    output is just an inline volt/current meter into a routerboard..
> only about 4 watts on the output...
>
> I am just about to send one back to taiwan and want to find out before
> they say back to me "Stupid American"
>
>
> Robert
>

Reply via email to