https://www.tractorsupply.com/tsc/product/feedlot-panel-cattle-16-ft-l-x-50-in-h
about 3300 for 8 foot tall without posts
leaves alot of budget for claymores

On Wed, Feb 28, 2018 at 9:09 PM, Josh Reynolds <[email protected]> wrote:

> A border wall of that would cost you about $201,960,000 just for reference.
>
> =)
>
> On Wed, Feb 28, 2018 at 5:39 PM,  <[email protected]> wrote:
> > All of the below.  Just don’t want to spend $25K for 1300 feet of fence.
> >
> >
> > From: Adam Moffett
> > Sent: Wednesday, February 28, 2018 3:59 PM
> > To: [email protected]
> > Subject: Re: [AFMUG] OT Security fence
> >
> > So are you looking for cheaper, more secure, or best value?
> >
> > No sane person would try to breach concertina wire.
> > https://www.google.com/search?q=concertina+wire&source=lnms&;
> tbm=shop&sa=X&ved=0ahUKEwjYjrv808nZAhVElJQKHX33B
> _AQ_AUICygC&biw=1536&bih=759#spd=3258212414157725779
> >
> > Cheap and easy enough for a grunt to install.
> > https://survivalblog.com/constructing-a-triple-strand-
> concertina-wire-obstacle-by-cpt-blackfox/
> >
> > Just a thought.
> >
> >
> > ------ Original Message ------
> > From: [email protected]
> > To: [email protected]
> > Sent: 2/28/2018 1:15:34 PM
> > Subject: [AFMUG] OT Security fence
> >
> >
> > I need a security fence on some property where I store equipment and
> > vehicles.
> > Got a quote from a fence company.
> > About $20/foot or more.  That was for chain link with barbed wire at the
> top
> > and a couple of fancy gates.
> >
> > Camp Williams (Utah Natl Guard) and the nearby NSA facility has a fence
> made
> > primarily out of hog wire.
> > It looks to be about 7’ tall and super t bar fence posts.
> >
> > Then there are other fences that look like they are using some form of
> mini
> > galvanized I beam.  Those are chain link.
> >
> > Looking for options.  If someone is hell bent on climbing a fence, the
> > difference between chain link and hog wire is not much.
> > Chain link is much more difficult to cut and slightly more difficult to
> > climb.
> >
> > Opinions?
>

Reply via email to